12.2.12 Enabling Scene Auto Length
By default a Scene is set to Auto Length allowing it to resize automatically to the content with-
in the Scene. If the length of a Scene is manually adjusted by truncating or lengthening the
Scene end marker, Auto Length is discarded and the Scene automatically set to Manual
Length.
Using the software or controller it is possible to quickly reset a Scene to back to Auto Length
in order to return to the Scene to its default state and reveal any truncated (hidden) content.
When Auto Length is enabled, the Manual Length settings are discarded and the Scene is re-
sized according to the Clips placed inside, and will continue to resize with the content unless
the length is again manually adjusted.
To enable Auto Length for a Scene in the software:
1.
Right-click on the Scene.
2.
Click
Auto Length
in the menu.
→
Auto Length is enabled and the selected Scene is automatically resized to fit the content
of the Clips within the Scene. Any manual adjustments that were previously made are
discarded.
12.2.13 Looping
Activate a Loop to repeatedly play a section of the Arrangement. Once a loop is activated the
Scenes within the range of the Loop play until the loop is deactivated. You can use the range
to repeatedly play a particular part of a song. This can be good for composing, practicing a part
Creating a Song Using Scenes
Managing Scenes
MASCHINE 2 - Manual - 592
