Mitsubishi GOT2000Series, Connection Manual

Page: 41 / 338

1. PREPARATORY PROCEDURES FOR MONITORING
1.4 Connection Cables for the Respective Connection
1 - 19
1
PREP
ARA
T
OR
Y PROCEDURES FOR MONIT
O
RING
1.4 Connection Cables for the Respective Connection
To connect the GOT to a device in the respective connection type, connection cables between the GOT and a device are
necessary.
For cables needed for each connection, refer to each chapter for connection.
1.4.1 GOT connector specifications
The following shows the connector specifications on the GOT side.
Refer to the following table when preparing connection cables by the user.

RS-232 interface
Use the following as the RS-232 interface and the RS-232 communication unit connector on the GOT. For the GOT
side of the connection cable, use a connector and connector cover applicable to the GOT connector.
(1) Connector specifications
(2) Connector pin arrangement

RS-422/485 interface
Use the following as the RS-422/485 interface and the RS-422/485 communication unit connector on the GOT.
For the GOT side of the connection cable, use a connector and connector cover applicable to the GOT connector.
(1) Connector model
(2) Connector pin arrangement
GOT
Hardware
version*1
Connector type Connector model Manufacturer
GT27
GT23
―
9-pin D-sub (male)
inch screw fixed type
17LE-23090-27(D4C )
DDK Ltd.
GT15-RS2-9P
―
9-pin D-sub (male)
inch screw fixed type
17LE-23090-27(D3CC) DDK Ltd.
GT01-RS4-M
―
GT27, GT23, GT15-RS2-9P, GT01-RS4-M
GOT Connector type Connector model Manufacturer
GT27
GT23
9-pin D-sub (female)
M2.6 millimeter screw
fixed type
17LE-13090-27(D2AC) DDK Ltd.
GT15-RS4-9S 9-pin D-sub (female)
M2.6 millimeter screw
fixed type
17LE-13090-27(D3AC) DDK Ltd.
GT01-RS4-M
GT15-RS4-TE
― ―
SL-SMT3.5/10/90F BOX
9-pin D-sub (male)
GOT main part connector
see from the front
1 5
6 9
GT27, GT23, GT01-RS4-M
9-pin D-sub (female)
GOT main part connector
see from the front
5 1
9 6