8 - 18
8. CONNECTION TO YOKOGAWA TEMPERATURE CONTROLLER
8.3 Connection Diagram
• For the product condition of UTAdvanced series, refer to the following table.
*2
Terminating resistor should be provided for a temperature controller which will be a terminal.
*3
Set the terminating resistor of GOT side which will be a terminal.
■
Connecting terminating resistors
*4
Connect FG grounding to the appropriate part of a cable shield line.
(9) RS-485 connection diagram 9)
*1
Pin No. of temperature controller differs depending on the model.Refer to the following table.
*2
Terminating resistor should be provided for a temperature controller which will be a terminal.
*3
Turn on the terminating switch on the RS232C/RS485 converter at the end.
*4
Connect FG grounding to the appropriate part of a cable shield line.
Model
Product
condition
Suffix code
Optional suffix code
Remark
Function
Open network
UT55A
A
-
1
-
Product with the open network port of
RS485 communication (4-wire type/2-wire
type)
B
1 or 2
-
Without "/LP"
Product with two RS485 communication
ports (4-wire type/2-wire type) and without
the power supply for 24VDC sensor
UP55A
A
Other than 3
1
-
Product without the additional contact
output points (DO) and with the open
network port of RS485 communication (4-
wire type/2-wire type) (Standard code
model)
-
-
With "/CH3"
Product with the RS485 communication port
(4-wire type/2-wire type) specified in the E3
terminal area option (Detailed code model)
B
2
-
-
Product with two RS485 communication
ports (4-wire type/2-wire type) (Standard
code model)
-
-
With "/C4"
Product with the RS485 communication port
(4-wire type/2-wire type) specified in the E4
terminal area option (Detailed code model)
Temperature controller
Temperature controller
RSB(+)
RSA(-)
SG
4
3
5
6
RSB(+)
RSA(-)
SG
B(+)
A(-)
SG
GND
RS232C/RS485
interface converter
*3
Terminating resistor(220Ω 1/4W)
*2
*4
*4
*1
*1
Signal name
Model of temperature controller
GREEN Series
UT750/UP750
UT100 Series
UT130/UT150/UP150
UT100 Series
UT152/UT155
UTAdvanced Series
UT52A/UM33A
UTAdvanced Series
UT55A/UP55A
Pin No.
Pin No.
Pin No.
Pin No.
Pin No.
RSB (+)
28
3
26
301
501
RSA (-)
29
4
27
302
502
SG
30
5
28
303
503
Summary of Contents for GOT2000Series
