Mitsubishi GOT2000Series, Connection Manual

Page: 293 / 338

11. CONNECTION TO GE PLC
11.5 PLC Side Setting
11 - 13
CONNECTION T
O
GE PLC
11
11.5 PLC Side Setting
POINT POINT POINT
GE PLC
For details of GE PLCs, refer to the following manuals.
GE PLC user's Manual
11.5.1 Connecting to Series 90-30

Communication settings
Make the communication settings using the
engineering tool.
When making the settings, set [Configuration Mode] on
the [Setting] tab of the engineering tool to "SNP only".
*1 Set to SNP.
*2 Set to Slave.
*3 Set to Long.
*4 Set to 0.
*5 Set within the range of 00 to 31.
When specifying the station No. from 0 to 9, add "0" before
the number and set it as 00 to 09.
*6 Set to 0.(only when connecting to Port2)
11.5.2 Connecting to VersaMaxMicro

Communication settings
Make the communication settings using the
engineering tool.
*1 Set to the SNP protocol.
*2 Set to Slave.
*3 Set to Long.
*4 Set to 0.
*5 Set within the range of 00 to 31.
When specifying the station No. from 0 to 9, add "0" before
the number and set it as 00 to 09.
Model name Refer to
PLC CPU
Series 90-30 11.5.1
VersaMaxMicro 11.5.2
Communication
Modules
IC693CMM311 11.5.3
IC697CMM711 11.5.4
Setting item PLC side setting
Port Mode
*1
SNP
Port Type
*2
Slave
Data Rate 9600bps, 19200bps
Flow Control NONE
Parity EVEN, ODD, NONE
Stop Bits 1bit, 2bits
Timeout
*3
Long
Turn Around Delay
*4
0
SNP ID
*5
00 to 31
Converter Power Consumption
*6
0
Setting item PLC side setting
Data Rate
9600bps, 19200bps,
38400bps
Bits / Character 7bits, 8bits
Parity EVEN, ODD, NONE
Stop Bits 1bit, 2bits
Port Mode
*1
SNP
Port Type
*2
Slave
Flow Control NONE
Timeout
*3
Long
Turn Around Delay
*4
0
SNP ID
*5
00 to 31