Mitsubishi GOT2000Series, Connection Manual

Page: 253 / 338

9. CONNECTION TO RKC TEMPERATURE CONTROLLER
9.5 Temperature Controller Side Setting
9 - 45
C
O
NN
ECTION T
O
RK
C TEMPE
R
A
T
UR
E CON
T
R
O
LLER
9
(3) Unit address settings
Set the unit address using the unit address setting
switch.
(4) Interval time settings
Configure the interval time setting using the RKC
communication setting tool (WinPCI).
After the communication is started, set as follows.
For the using method of RKC communication setting
tool, refer to the following.
RKC communication setting tool user's manual
9.5.5 Connecting to CB Series
(1) Communication settings
*1 When the setting value is set to 0, a communication is not
made.
*2 Adjust the settings with GOT settings.
(2) Communication setting mode
Set the communication setting mode using the
operation panel of the CB series main unit.
For details of the communication setting mode, refer to
the following.
CB series "Communication Instruction Manual"
9.5.6 Connecting to FB Series
(1) Communication settings
*1 Items and setting range are common to communication 1
and communication 2.
*2 When the setting value is set to 0, a communication is not
made.
*3 Adjust the settings with GOT settings.
(2) Data bit configuration
(3) Communication setting mode
Set the communication setting mode using the
operation panel of the FB series main unit.
For details of the communication setting mode, refer to
the following.
FB series "Communication Instruction Manual"
Setting item Set value
Instrument 0
CFG file ZCOM_rkc.cfg
Communication 1 interval time
0 to 250ms
Communication 2 interval time
Item Setting range
Device address
*1
1 to 99
Communication speed
*2
2: 9600bps
3: 19200bps
Data bit configuration
0: 8/1/None
6: 8/1/Even
7: 8/1/Odd
Interval time 0 to 150
Unit address setting switch
Setting range : 0 to F
COM
Item
*1
Setting range
*1
Communication protocol 1: MODBUS
Device address
(Slave address)
*2
1 to 99
Communication speed
*3
96: 9600bps
19.2: 19200bps
38.4: 38400bps
Data bit configuration (2) Refer to the data bit configuration.
Interval time 0 to 250
Set value Data bit Parity bit Stop bit
8n1 8 None 1
8n2 8 None 2
8E1 8 Even 1
8E2 8 Even 2
8o1 8 Odd 1
8o2 8 Odd 2