Mitsubishi GOT2000Series, Connection Manual

Page: 140 / 338

6 - 20
6. CONNECTION TO YASKAWA PLC
6.3 Ethernet Connection
6.3.4 PLC side setting (MP2000
series, MP920 series)
POINT POINT POINT
YASKAWA PLC
For details of YASKAWA PLCs, refer to the following
manuals.
YASKAWA PLC user's Manual

Parameter settings
Make the parameter settings with a peripheral tool.
(1) Settings for 218IF-01
*1 When MITSUBISHI PLC and YASKAWA PLC are used
together in the same network, do not set the same value for
the Station of MITSUBISHI PLC and the CNO (Connection
number) of YASKAWA PLC.
*2 Set the same the Node IP Address (Remote Station's IP
Address) and the Node Port (Remote Station's Port Number)
as the Local IP Address and the Local Port (Local Station's
Port Number) on the GOT side.
For the Local IP Address and the Local Port (Local Station's
Port Number) on the GOT side, refer to the following.
6.3.2
■
Ethernet setting
(2) Setting for the built-in MP2300S Ethernet and 218IF-
02
*1 Set the same the Node IP Address (Remote Station's IP
Address) and the Node Port (Remote Station's Port Number)
as the Local IP Address and the Local Port (Local Station's
Port Number) on the GOT side.
For the Local IP Address and the Local Port (Local Station's
Port Number) on the GOT side, refer to the following.
6.3.2
■
Ethernet setting
Item Set value Range
Parameter
setting
Local IP Address [ ].[ ].[ ].[ ]
PLC side IP
address
Response Time 0
Not required for
communication
with GOT
Count of Retry
(Number of Retries)
0
Not required for
communication
with GOT
CNO
*1
(Connection Number)
1 1 to 20
Local Port (Local
Station's Port Number)
10500 256 to 65534
Node IP Address
(Remote Station's IP
Address)
*2
[ ].[ ].[ ].[ ]
IP address
of GOT
Node Port (Remote
Station's Port Number)
*2
[ ]
Port No.
of GOT
Connection Type
UDP
(recommended)
UDP/TCP
Protocol Type
Extended
MEMOBUS
Extended
MEMOBUS,
MEMOBUS,
MELSEC,
None,
MODBUS/TCP
Code BIN RTU, BIN, ACII
Node Name (Remote
Station's Name)
GOT1000 Name of GOT
Local Port:
TCP/IP
Setting
Subnet Mask [ ].[ ].[ ].[ ]
PLC side
setting
Gateway IP Address [ ].[ ].[ ].[ ]
System Port No.
(Diagnostic/
Engineering Port No.)
10000
TCP (Transmission
Control Protocol) Zero
Window Timer Value
3 sec
TCP Retry Time 500ms
TCP Close Time 60 sec
IP Assemble Time 30 sec
MAX. Packet Length 1500 bytes
Item Set value Range
Transmission
parameter
setting
IP Address [ ].[ ].[ ].[ ]
PLC side IP
address
Subnet Mask [ ].[ ].[ ].[ ]
PLC side setting
Gateway IP Address [ ].[ ].[ ].[ ]
Device name Arbitrary
Up to 16 one-byte
characters
Transmission
parameter
detailed setting
Engineering Port 256 to 65535
For a connection
with software
MPE720
Response Time 0 Not required for
communication
with GOT
Count of Retry
(Number of Retries)
0
Message
communication
of connection
parameter
setting
Connection Number 1
• Range of built-
in MP2300S
Ethernet: 1 to 4
• Range of
218IF-02: 1 to
20
Local Port 10500 256 to 65534
Node IP Address
*1
[ ].[ ].[ ].[ ]
IP address
of GOT
Node Port
*1
[ ]
Port No.
of GOT
Connection Type
UDP
(recommended)
TCP/UDP
Protocol Type
Extended
MEMOBUS
Extended
MEMOBUS,
MEMOBUS,
MELSEC,
None,
MODBUS/TCP
Code BIN RTU, BIN, ACII
Node Name Arbitrary
Up to 32 one-byte
characters
(16 two-byte
characters)