Mitsubishi Electric Q80BD-J71BR11, User Manual

Page: 95 / 224

7 - 3 7 - 3
MELSEC
7 PARAMETER SETTINGS
7.2 Network Settings
These are the parameters used to build the MELSECNET/H network.
The MELSECNET/H board’s network No., station No., control station/normal station
setting and group No. are set.
7.2.1 Network No.
Set the Network No. of the network which the MELSECNET/H board is connected to.
To set the network No, set it in the "Board Information" screen in the MNETH utility.
(1) Valid setting range
1 to 239
(2) Caution
(a) Set the same network No. to all of the devices connected to the same
network.
2N
S
1
CPU QJ71
1M
P
2 1N
S
3 1N
S
4
Network
No.1
CPU QJ71 QJ71
Network
No.1
Network
No.1
Network
No.2
7.2.2 Station No.
Set the station No. of the MELSECNET/H board.
Set the station No. in the "Board Information" screen of the MNETH utility.
(1) Effective setting range
The effective setting range differs depending on the type of network.
• Optical loop system··········1 to 64
• Coaxial bus system··········1 to 32
(2) Caution
(a) Make settings so that the same station No. does not exist in more than one
place in the same network.
7.2.3 Control station/Normal station
Set the Control station / Normal station setting on the MELSECNET/H board.
Set the Control station / Normal station setting in the "Board Information" screen of the
MNETH utility.