Mitsubishi Electric Q80BD-J71BR11, User Manual

Page: 128 / 224

9 - 20 9 - 20
MELSEC
9 UTILITY OPERATIONS
9.2.11 Driver screen operation
This operation sets the combination settings between the MELSECNET/H board and
MELSECNET/10 board and sets the link device access method and the time for each
type of monitoring.
Item Content
Channel Sets the channel (MELSECNET/H board) which sets the link device access method.
Link Device Access Method
Setting Sets the access method to link devices (LX, LY, LB, LW). (Refer to (1) in this section)
When Link Refresh is selected, specify the link refresh interval.
Transient Timeout Monitoring
Time Setting Displays the current value for the transient time out monitoring time and inputs the setting
value.
Driver WDT Monitoring Time
Select "Use driver WDT function" to enable the function.
Displays the current value for the Driver WDT Monitoring Time and inputs the setting value.
(1 to 32767)
Set Button
Enables the setting contents.
The channel No. settings are reassigned after the Set button is clicked.
Default Value Button
Returns the set contents to the default values.