Mitsubishi Electric MELSERVO-JN Series, Instruction Manual

Page: 331 / 480

12 - 28
12. SERVO MOTOR
12.6.2 Specifications
(1) Specifications list (When combined with an MR-JN- A series servo amplifier.)
Servo motor
Item
HF-KP series (Low inertia, small capacity)
053G1/G5/G7 13G1/G5/G7 23G1/G5/G7 43G1/G5/G7
Applicable servo
amplifier MR-JN- A 10 20 40
MR-JN- A1 10 20
Continuous
running duty
(Note 1)
Rated output [kW] 0.05 0.1 0.2 0.4
Rated torque
(Note 8)
[N m] 0.16 0.32 0.64 1.3
[oz in] 22.7 45.3 90.6 184
Rated speed (Note 1, 3) [r/min] 3000
Maximum speed (Note 3) [r/min] 4500
Instantaneous permissible speed [r/min] 4500
Maximum torque (Note 8)
[N m] 0.48 0.95 1.9 3.8
[oz in] 68.0 135 269 538
Power rate at continuous rated torque
(Note 8)
[kW/s] 4.87 11.5 16.9 38.6
Inertia moment
J [×10 -4 kg m 2 ]
Refer to sections 6.8.3 to 6.8.8 in the Servo Motor INSTRUCTION MANUAL
(Vol.2). WK 2 [oz in 2 ]
Recommended load to motor inertia moment
ratio (Note 2)
Refer to section 12.6.4
Power supply capacity Refer to section 10.2.
Rated current [A] 0.9 0.8 1.4 2.7
Maximum current [A] 2.7 2.4 4.2 8.1
Speed/position encoder
Incremental 18-bit encoder
(Resolution per servo motor 1 rotation: 262144pulses/rev)
Accessory
Insulation class Class B
Structure Totally-enclosed, self-cooled (IP rating: IP44 (Note 4))
Environmental
conditions
(Note 5)
Ambient
temperature
In operation 0 to +40 (32 to 104 ) (non-freezing)
In storage -15 to +70 (5 to 158 ) (non-freezing)
Ambient
humidity
In operation 10%RH to 80%RH (non-condensing)
In storage 10%RH to 90%RH (non-condensing)
Ambient
Indoors (no direct sunlight)
Free from corrosive gas, flammable gas, oil mist, dust and dirt
Altitude Max. 1000m
Vibration resistance (Note 6)
X, Y : 49m/s 2
Vibration rank (Note 7) V-10
Permissible load for the shaft Refer to section 12.6.4.
Mass [kg] ([lb])
Refer to sections 6.8.3 to 6.8.8 in the Servo Motor INSTRUCTION MANUAL
(Vol.2).
Note 1. When the power supply voltage drops, the output and the rated speed cannot be guaranteed.
2. If the load to motor inertia moment ratio exceeds the indicated value, please contact your local sales office.
3. The above values are in the reduction gear input shaft.
4. Except for the shaft-through portion.
5. In the environment where the servo motor is exposed to oil mist, oil and/or water, a standard specification servo motor may not
be usable. Contact your local sales office.