Mitsubishi Electric AnyWire ASLINK, User Manual

Page: 166 / 200

164
APPX
Appendix 3 Remote Buffer Memory
The following table lists the configuration of 48 words using the parameter area 1st module (48 words) as an example.
 : Possible,  : Impossible
For details on each parameter, refer to the following.
 Page 69 Slave Module Parameter Read/Write
Parameter storage location memory number
■
Address
■ Description
After automatic address detection, the start address of the buffer memory that stores the parameter of the connected slave
module is stored in these areas. The parameters of the slave module are 48 words.
The following table lists the assignment of the remote buffer memory addresses.
Address Name Read Write Parameter name
1000H Module ID   AnyWireASLINK parameter
1001H Device parameter 1
 
Device parameter
1002H Device parameter 2
 
   
1012H Device parameter 18  
1013H Device parameter 19
 
1014H to 1026H System area
 
1027H Status details
 
AnyWireASLINK parameter
1028H Sensing level  
1029H to 102BH System area
 
102CH Model number
 
102DH Device version
 
102EH to 102FH System area  
Name Address
Parameter storage location memory number 4000H to 47FFH
Address Parameter storage location buffer memory start address
4000H Parameter storage location buffer memory start address of the slave module ID 0000H
4001H Parameter storage location buffer memory start address of the slave module ID 0001H
 
47FFH Parameter storage location buffer memory start address of the slave module ID 07FFH