Mitsubishi Electric AnyWire ASLINK, User Manual

Page: 152 / 200

150
APPX
Appendix 3 Remote Buffer Memory
Details of buffer memory addresses
Bit data points setting
■
Address
■
Description
Set the total number of input/output points for bit data to be used.
The relationship between setting and setting value is as follows.
If Module parameter reflection request flag (RYC) is turned on after writing anything other than the above, Bit data points
setting range error (error code: 1801H) is displayed. Also, the setting will not be reflected in the non-volatile memory.
If Module parameter reflection request flag (RYC) is turned on after writing 000AH (0 points (0 input points/0 output points)) to
Bit data points setting (address: 0100H), and writing 0000H (Not Use) to Word data use setting (address: 0101H),
Transmission points setting error (error code: 180CH) is displayed. Also, the setting will not be reflected in the non-volatile
memory.
Name Address
Bit data points setting 0100H
Setting Setting value
64 points (32 input points/32 output points) 0000H
128 points (64 input points/64 output points) 0001H
256 points (128 input points/128 output points) 0002H
512 points (256 input points/256 output points) 0003H (initial value)
1024 points (512 input points/512 output points) 0004H
0 points (0 input points/0 output points) 000AH