Mitsubishi Electric AnyWire ASLINK, User Manual

Page: 148 / 200

146
APPX
Appendix 2 Remote Register
Parameter access target module ID specification
■
Device No.
■ Description
Specify the target ID for accessing the parameters of individual slave modules.
The IDs that can be set are as follows.
Change ID specification
■ Device No.
■
Description
Specify a new ID of when changing the remote address.
The ID that can be set is the same as Parameter access target module ID specification (RWw1).
For details, refer to the remote address change function below.
 Page 59 Remote Address Change Function
AnyWireASLINK word output signal
■
Device No.
■ Description
When the word output information of a slave module is written, the slave module automatically outputs a signal.
■
Example
For a word output slave module (address: 508) with 2-word data points, the 2 words (RWw21C, RWw21D) from RWw21C are
occupied for the word output signal because the address is 508.
*1 The occupied area when the setting address of the word output slave module with 2-word data points is 508
Name Device No.
Parameter access target module ID specification RWw1
ID Slave module type
0000H to 01FFH Bit output slave module
0200H to 03FFH Bit input slave module
Bit I/O combined slave module
0400H to 05FFH Word output slave module
0600H to 07FFH Word input slave module
Word I/O combined slave module
Name Device No.
Change ID specification RWw2
Name Device No.
AnyWireASLINK word output signal RWw20 to RWw21F
Output signals Word output information area
RWw20 0
RWw21 1
RWw22 2
RWw23 3
RWw24 4
 
RWw21C 508
*1
RWw21D 509
*1
RWw21E 510
RWw21F 511