Mitel OfficeConnect 5310 User Reference Manual Download Page 99

Page: 99 / 170

Using the phone system 93

Final

To forward to prompt, follow the steps:

Press the

Forward to Prompt

key on your phone. The system will ask

you to enter a phone number.

Enter the phone number on the phone keypad.

Press the # key on the keypad.

To change the phone number for the forward to prompt, repeat the above
three steps.

To turn forward to prompt off, follow these steps:

Press the

Forward to Prompt

key.

Press the # key on the keypad.

To use this feature, you must have a key programmed with

Forward to

Prompt

The system stores internal extensions; therefore, you do not need to
press the # key for extensions.

If you forward a phone to an external phone number, you must have
permission to make that external call and Redirect Inbound Call to
External Number permission. See “Permissions” on page

120

for

instructions on how to view your call permissions.

If you have this feature turned on when you log out of your phone, all your
calls will be forwarded to the number you entered.

Handsfree answerback on the 5304 phone

Using

Handsfree answerback

, you can have intercom calls automatically

answered on your phone. See “Intercom to co-worker on the 5304 phone” on
page

. Since there is no handsfree microphone in the phone, you must lift

the handset to be able to speak to the caller.

Press the

Handsfree answerback

key to turn the feature on. Press the key a

second time to turn the feature off. The display will briefly show that the

Handsfree answerback

feature has been turned on or off. Note that there is

no permanent visual indication to show that the

Handsfree answerback

feature is turned on.

Summary of Contents for OfficeConnect 5310











































































































































































Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands

Mitel OfficeConnect 5310, User Reference Manual

Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands