Mitel OfficeConnect 5310 User Reference Manual Download Page 110

Page: 110 / 170

104 Using the phone system

Final

Connect and configure the headset

To connect the headset to the Mitel 5330/5340, 5224/5324 or 5212/5312 IP
phone, follow these steps:

Plug the headset into the headset jack on the back of the set.

Remove the handset from the cradle. You can hook it over the top of the
set cradle.

If using a Mitel 5330/5340 or 5224/5324 IP phone, press the

DIR

softkey,

then the

QUIT

softkey to take the phone to an on-hook (or idle) state.

If using a Mitel 5212/5312 IP phone, press the

key, then press the

key to take the phone to an onhook (or idle) state.

Answer a Call with the headset

To answer a call while using the headset, press the

Line Appearance

key or

the

ANSWER

softkey.

End a Call with the headset

To end a call while using the headset on the Mitel 5224/5324 or 5330/5340 IP
phone, press the

END

softkey

To end a call while using the headset on the Mitel 5212/5312 IP phone, press

the

key.

Mute the headset

To mute the microphone, press and hold the control switch if it has one.

Make a call with the headset

To make a call while using the headset, press a Line Appearance key and dial
the number. line. You can also use dial, directory dial, and speed dial features.
See the section for making a call for your phone model in this guide.

Switch to the handset

To divert the operation back to the handset, the user can either

•

Disconnect the headset from the phones jack or

Summary of Contents for OfficeConnect 5310











































































































































































Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands

Mitel OfficeConnect 5310, User Reference Manual

Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands