48 Using the phone system
Final
Logout from the 5224/5324 phone
To log out of a phone, follow these steps when your phone has no calls
connected. At the start, the display should display the following:
1
Press the
MENU
softkey.
.
2
Press the
LOGOUT
softkey
The LCD displays a confirmation message.
3
Press the
YES
softkey to proceed. The LCD will display the message
“Logout successful”, confirming that you are logged out of the phone and
the system. Incoming calls will be forwarded to Call Coverage. The
display will return to a logged out/unassigned idle state
.
If your phone has been locked you cannot log out of the phone. The
LOGOUT softkey will not be displayed on your phone. Contact your
system administrator for assistance.
You cannot log in or out, or activate a phone, while the phone is on an
active call.
You can press the
key instead of the
QUIT
softkey.
After you have logged out of the phone, callers to your extension will be
directed to your call coverage target. If no call coverage target is set, the
phone will ring until the caller hangs up.
If the primary member of a Monitor Group logs out of the phone, calls to
the Monitor Group will still ring any secondary phones and will redirect to
the primary member’s call coverage target after the configured number of
rings.
For more information about Monitor Groups, see “Monitor groups on the
5224/5324 phone” on page
48
.
If a logged out phone has twinning configured, the twinning target phone
will ring and the call wil be redirected to the logged-out phone’s call
coverage target after the configured number of rings.
Monitor groups on the 5224/5324 phone
Using the Monitor Groups feature, your calls can be monitored and answered
by other users or you can have your phone monitored for activity. To enable
Extension: 314
REDIAL CALLS MENU
MENU
LOGOUT DIR QUIT
Confirm Logout
YES NO
Logout Successful
Logged Out
ACTIVATE
