Mitel OfficeConnect 5310 User Reference Manual Download Page 74

Page: 74 / 170

68 Using the phone system

Final

Forward your 5212/5312 IP phone to auto attendant

Using Forward to Auto Attendant, you can send all incoming calls to a
selected auto attendant. Press the

Forward to AA

key once to turn the

feature on. Press the key a second time to turn the feature off. The LED on
the programmed key indicates when the phone is being forwarded.

To use this feature, you must have a key programmed with

Forward to AA

If you have this feature turned on when you log out of your phone, all your
calls will be forwarded to the auto attendant.

Forward your 5212/5312 IP phone to co-worker

Using Forward to Co-worker, you can send all incoming calls to a selected co-
worker. Press the

Forward to Co-worker

key once to turn the feature on.

Press the key a second time to turn the feature off. The LED on the
programmed key indicates when the phone is being forwarded.

To use this feature, you must have a key programmed with

Forward to Co-

worker

If you have this feature turned on when you log out of your phone all your
calls will be forwarded to your co-worker.

Forward your 5212/5312 IP phone to coverage

Using Forward to Coverage, you can send all incoming calls to the option you
selected for your Call Coverage (see “Call Coverage” on page

133

). Press the

Forward to Coverage

key once to turn the feature on. Press the key a

second time to turn the feature off. The LED on the programmed key indicates
when the phone is being forwarded.

To use this feature, you must have a key programmed with

Forward to

Coverage

If you have this feature turned on when you log out of your phone all your
calls will be forwarded to coverage.

Forward your 5212/5312 IP phone to number

Using Forward to Number, you can send all incoming calls to a preset phone
number. Press the

Forward to Number

key once to turn the feature on. Press

the key a second time to turn the feature off. The LED on the programmed key
indicates when the phone is being forwarded.

Summary of Contents for OfficeConnect 5310











































































































































































Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands

Mitel OfficeConnect 5310, User Reference Manual

Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands