Mitel OfficeConnect 5310 User Reference Manual Download Page 23

Page: 23 / 170

Using the phone system 17

Final

feature on. Press the key a second time to turn the feature off. The LED on
the programmed key indicates when the phone is being forwarded.

To use this feature, you must have a key programmed with

Forward to Auto

Attendant

. See “Program memory keys” on page

122

Note: If you have this feature turned on when you log out of your phone all
your calls will be forwarded to the auto attendant.

Forwarding your 5330/5340 phone to co-worker

Using Forward to Co-worker, you can send all incoming calls to a selected co-
worker. Press the

Forward to Co-worker

key once to turn the feature on.

Press the key a second time to turn the feature off. The LED on the
programmed key indicates when the phone is being forwarded.

To use this feature, you must have a key programmed with

Forward to Co-

worker

. See “Program memory keys” on page

122

Note: If you have this feature turned on when you log out of your phone all
your calls will be forwarded to your co-worker.

Forwarding your 5330/5340 phone to coverage

Using Forward to Coverage, you can send all incoming calls to the option you
selected from My Call Coverage. Press the

Forward to Coverage

key once

to turn the feature on. Press the key a second time to turn the feature off. The
LED on the programmed key indicates when the phone is being forwarded.

To use this feature, you must have a key programmed with

Forward to

Coverage

. See “Program memory keys” on page

122

Note: If you have this feature turned on when you log out of your phone
all your calls will be forwarded to coverage.

Forwarding your 5330/5340 phone to number

Using Forward to Number, you can send all incoming calls to a preset phone
number. Press the

Forward to Number

key once to turn the feature on. Press

the key a second time to turn the feature off. The LED on the programmed key
indicates when the phone is being forwarded.

To use this feature, you must have a key programmed with

Forward to

Number

. See “Program memory keys” on page

122

Summary of Contents for OfficeConnect 5310











































































































































































Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands

Mitel OfficeConnect 5310, User Reference Manual

Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands