134 Personalizing phone usage via the web
Final
the Navigation pane. If allowed for your phone, this page also allows you to
set the twinning option which allows you to ring another phone (such as your
cell phone) simultaneously with your desk phone.
To set-up or change Call Coverage, follow these steps:
1
Select one of the following options:
•
My Voice Mail
•
Auto Attendant, and select an Auto Attendant from the drop-down list
•
My Co-worker, and select a Co-worker from the drop-down list
•
Another Phone Number, and enter a phone number (including 9 if it is an
outside call).
2
Select how many times you want the phone to ring before going to the
coverage option.
3
Select the
Save
button to save the information.
4
To disable Call Coverage, select the
No Call Coverage
checkbox and
then select the
Save
button to save the information.
If you log out of your phone, the call coverage option that you last set up
will applly unless you had call forwarding turned on.
If the Call Coverage option of your choice no longer exists (an Auto
Attendant or Co-worker), your call coverage will default to No Call
Coverage.
If you cannot select My Voice Mail, it is because your phone has not been
configured for voice mail. See the system administrator.
If you configure your call coverage to an external phone number you must
have permission to make that external call and Redirect Inbound Call to
External Number permission.
Twinning
If the option is allowed by your administrator, you can configure twinning
which allows you to ring another phone (such as your cell phone)
simultaneously with your desk phone. To view your Twinning options, select
the
My Call Coverage
option in the Navigation pane.
Follow these steps to set your twinning parameters:
1
Select the
Activate Twinning
checkbox
2
In the
Twinning Target
field, enter the phone number of the phone you
want to ring in addition to your desk phone. Enter the number as you
would normally dial it from your desk phone, including prefix digits.
3
Enter the maximum number of simultaneous calls you want sent to your
twinning target in the
Maximum # of simultaneous calls to Target
field.
