Mitel OfficeConnect 5310 User Reference Manual Download Page 114

Page: 114 / 170

108 Using the phone system

Final

Switch between handset and the conference unit on 5330/
5340 phones

Note that your handset must be onhook (i.e. you must be in speakerphone
mode) to use the conference unit.

Follow these steps to switch a call from the handset to the conference unit:

Press the

key.

Replace the handset in the cradle.

Press the flashing

Line Appearance

key to take the call off hold and

switch to speakerphone mode.

Press the

Conference Unit

memory key to start the Conference Unit

application.

Press the key labelled

Turn On

Follow this step to switch a call from the conference unit to the handset:

Lift the handset.

Adjust volume on the conference unit on 5330/5340 phones

To adjust the volume on the conference unit, follow these steps:

If the Conference Unit application is not currently running, press the
Conference Unit memory key to start the Conference Unit application.

Adjust the volume by pressing the keys labelled

Volume Up

and

Volume

Down

Note that the

Arrow

keys cannot be used to adjust the volume while using the

conference unit. These keys only apply to the handset and speakerphone
mode.

Use Presentation mode on 5330/5340 phones

The 5310 Conference Unit has multiple directional microphones around the
disk. Based on sound that it detects, it turns on the microphone pointing in
that direction. As different speakers talk, it changes which microphone is on.

Presentation mode allows you to lock the unit so that the microphone
currently on stays on, thereby removing potential background noise.

To turn on Presentation mode while using the conference unit, follow these
steps:

If not currently running the Conference Unit application, press the

Conference Unit

memory key to start the Conference Unit application.

Press the key labelled

Presentation Mode

Summary of Contents for OfficeConnect 5310











































































































































































Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands

Mitel OfficeConnect 5310, User Reference Manual

Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands