Using the phone system 53
Final
"Park Locations Full" and the call will be placed on hold.
If the call is left parked for 30 seconds, the phone of the person who
parked the call will beep and the phone’s LCD will briefly display "Call
parked at: " with the park location number to remind you that the call has
not been retrieved.
Speaker on the 5224/5324 phone
Using Speaker, you can turn the speakerphone on your phone on and off. To
use Speaker, press
the
key.
Transfer call on the 5224/5324 phone
Using Transfer, you can transfer a call from one phone to another. To transfer
a call, follow these steps:
1
While on an active call, press the TRANS softkey. The system places the
call on hold, and the LCD screen displays:
2
Enter the extension or phone number of the person to whom you want to
transfer the call, or press a One-Touch Speed Dial key, or press a Line
Appearance key that has a call on hold.
3
Press the TRANSFER softkey once you hear ringing. You can also press
the TRANSFER softkey after the additional party has answered. The LCD
screen displays the message “Transfer Complete” for approximately five
seconds before returning to an idle state.
If you enter an invalid extension during a transfer, the LCD screen displays
“Invalid Extension”. To reconnect with the caller, follow these steps:
1
Press the
END
softkey.
2
Press the flashing Line Appearance key.
3
Try to transfer the call again.
If you choose not to complete the transfer, press the QUIT softkey, then
press the flashing Line Appearance key to retrieve the original call.
You can use the
key instead of the TRANS or TRANSFER
softkey.
Transfer To:
DIR QUIT
Transfer To:415
QUIT
