Mitel OfficeConnect 5310 User Reference Manual Download Page 107

Page: 107 / 170

Using the phone system 101

Final

Press the

Transfer/Conference

key once you hear ringing. The LCD

screen displays the message "Transfer Complete" for approximately five
seconds before returning to an idle state.

Instead of pressing the

Transfer/Conference

key immediately, you can

wait until the destination answers and then press the key.

If you enter an invalid extension during a transfer, the LCD screen displays
"Invalid Extension". To reconnect with the caller, follow these steps:

Press the flashing Line Appearance key.

Try to transfer the call again.

Transfer to voice mail from the 5304 phone

You must program a

Transfer/Conference

memory key to be able to use this

feature. See “Program memory keys” on page

122

If your administrator has configured an auto attendant for voice mail deposit,
you can transfer a caller directly to a co-worker's voice mail box.

To transfer a call to voice mail, follow these steps:

While on an active call, press the

Transfer/Conference

key. The system

places the call on hold, and the LCD screen displays:

Enter the extension of the auto attendant that your administrator has
created for voice mail deposit.

Select the auto attendant voice mail deposit option and enter the
extension of the co-worker to whom you are transferring.

Press the

Transfer/Conference

key to complete the transfer. The LCD

displays the message "Transfer Complete" for approximately five seconds
before returning to an idle state.

Twinned Calls on the 5304 phone

If you have configured your phone to be twinned to another external phone
(the twinning target), then incoming calls will simultaneously ring the other

Transfer To: 415

Transfer To:

Transfer To: 701

Summary of Contents for OfficeConnect 5310











































































































































































Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands

Mitel OfficeConnect 5310, User Reference Manual

Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands