Mitel OfficeConnect 5310 User Reference Manual Download Page 119

Page: 119 / 170

Using the phone system 113

Final

Press the

Presentation Mode

key on the mouse.

The key light turns on to indicate that you are in Presentation mode.

To turn off Presentation mode while using the conference unit, follow this step:

Press the

Presentation Mode

key on the mouse.

The key light turns off to indicate that you are not in Presentation mode.

Mute the call on the conference unit on 5324 phones

To mute a call while using the conference unit, follow this step:

Press the

Mute

key on the mouse.

The key light turns on to indicate that you are Muted.

To un-mute a call while using the conference unit, follow this step:

Press the

Mute

key on the mouse.

The LED beside the memory key turns off to indicate that you are not
muted.

Hang up a call on the conference unit on 5324 phones

To hang up a call while using the conference unit, follow this step:

If the handset is not in the cradle, replace the handset.

Press the

Power On/Off

button on the mouse.

Using the conference unit on 5324 phones without the
mouse

If you are using the conference unit for 5324 phones without the mouse
attachment, then the conference unit becomes a replacement for the built-in

speakerphone. When in a talking state, if you press the

key, this turns

on or off the conference unit. When the conference unit is on, then the arrow

keys (for volume) and the

key apply to the conference unit. You cannot

use the Presentation Mode feature without the mouse attachment.

Using other
phones

This phone system supports usage of other phones using the SIP protocol.
Not all features are supported on other phones. Consult the documentation
provided with the other phones.

Summary of Contents for OfficeConnect 5310











































































































































































Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands

Mitel OfficeConnect 5310, User Reference Manual

Search results

Summary of Contents for OfficeConnect 5310

Reviews:

Related manuals for OfficeConnect 5310

Brands by name

Popular brands