X-Cell Furion 450 Assembly Manual
Created: 8/27/2008
Copyright Miniature Aircraft USA
Page 81 of 89
This document may not be distributed without permission of Miniature Aircraft USA
Once this is done, there should be equal amounts of pitch in both the positive and negative directions. +- 10 degrees
pitch on the collective is recommended. This can be adjusted by changing the high and low points of the pitch curve
Pitch Curve – Full Positive
Blade Pitch – Plus 10
Measure blade pitch using a pitch gauge. These typically install on a blade tip as shown and readings are determined
by sighting down an edge of the gauge against the flybar/swashplate as shown.
Pitch Curve – Full Negative
Blade Pitch – Minus 10
Level
Level
Level
Level
Level
Level
