X-Cell Furion 450 Assembly Manual
Created: 8/27/2008
Copyright Miniature Aircraft USA
Page 55 of 89
This document may not be distributed without permission of Miniature Aircraft USA
4A.7.i 4A.7.j 4A.7.k 4A.7.l
Building Notes:
Install the mixer arms onto the
mixer base EXACTLY as shown
using thread lock. Be careful not
to get any in the bearings.
The orientation of the links and
balls are important
The extended part of the
washout base is the bottom
4A.7.m 4A.7.n 4A.7.o
Building Notes:
If the servos are properly
centered and the swashplate
rods are the correct lengths,
when the collective is centered
the mixer arms will be centered
as shown.
#130-145
#130-030
#130-030
Install Links
On Short
Balls
Short
Balls
