X-Cell Furion 450 Assembly Manual
Created: 8/27/2008
Copyright Miniature Aircraft USA
Page 65 of 89
This document may not be distributed without permission of Miniature Aircraft USA
5A.4.gg 5A.4.hh 5A.4.ii 5A.4.jj
Building Notes:
Peel the backing off of one of the
decals and apply it to a paddle.
Note that the paddle has molded
inlays where the decal goes.
Start applying on one side of the
paddle and wrap around as
shown. Press out air bubbles so
it seals against the paddle body.
5A.4.kk 5A.4.ll 5A.4.mm
5A.4.nn
5A.4.oo
5A.5 Install Rotor Head
5A.5.a 5A.5.b 5A.5.c 5A.5.d
Building Notes:
Install the main rotor on the
main shaft as shown. Be careful
to align the side bolt hole with
the slot on the main shaft as well
as the center mount hole with
the center hole on the main
shaft. Install the two bolts with
thread lock.
DO NOT OVERTIGHTEN THESE
BOLTS.
Align
Hole
And
Slot
#130-040
#130-144
Thread on flybar
paddles as shown
#130-144
60mm
You must thread on
the paddles fully
Make sure the leading
edge of the paddles would
be rotating this way
