X-Cell Furion 450 Assembly Manual
Created: 8/27/2008
Copyright Miniature Aircraft USA
Page 47 of 89
This document may not be distributed without permission of Miniature Aircraft USA
4A.1 Install Elevator Servo
Parts Relationship
4A.1.a 4A.1.b 4A.1.c 4A.1.d
Building Notes:
Install the elevator servo as
shown. Use short servo screws
or cut longer ones off to ensure
that the servo screws do not hit
the t/r belt
Be careful not to disturb the
routing of the t/r belt during
the servo installation
4A.2 Install Electronics
4A.2.a 4A.2.b 4A.2.c 4A.2.d
Building Notes:
Install your gyro on the plate
underneath the tail boom. Use
the mounting method specified
by the gyro manufacturer.
Connect the T/R servo to the
gyro.
Building Notes:
If it is not pre-wired, attach
connectors to your ESC
according to the manufacturer’s
recommendations.
Do not connect it to the motor
yet as you will need to power up
the receiver/servos in the next
section
‘
#130-282
#130-282
#130-041
#130-010
#130-076
Elevator
Servo
#130-282
