background image

Supplies:      

Paint:

 Interior semi-gloss latex paint... Almost everything gets at least one coat before assembly -  get the paint now. 

Paintbrushes

 1” or 2” foam brushes for each color, 3” foam roller for interior painting

Sandpaper: 

320 grit, 3-5 sheets

Glue: 

Aleene’s Tacky Glue for the dollhouse, Solvent-Based panel cement for shingles 

Masking tape:

 ¾” or 1” 

Wiring:

 it’s easiest to install some parts during assembly… order wiring supplies now.  

Wallpaper paste:

 Roman’s “Border” Paste

The

   

Special Edition Alison, Jr.

 

Instructions for 

Real Good Toys’

 Special Edition Kit #SE-JM907

©04/17

Congratulations on your choice of a Real Good Toys product.  Your kit has been precision made with meticulous 
care by our craftspeople using carefully selected materials.  This Dollhouse will last for years, even generations, 
if heirloom care and attention is given during assembly.  Take your time and read the instructions completely.  If 
you have questions, ask the experts at your local Dollhouse store or at [email protected]

Preview the Overview

 (page 2) to plan and organize your 

build; this helps you proceed with confi dence. 

Prepare your space

:  

This dollhouse will spread 

out over a large area while it is being built.  

You will need a large fl at tabletop for the house, 

several boxes to keep parts organized until they 

are needed, and several trays lined with waxed 

paper for holding small parts like windows and 

railings.  

A snap-lid box will keep your tools and sup-

plies handy between building sessions.

Not suitable for children under 13 years of age
California 93120 compliant for formaldehyde phase 2

Before you begin - 

You have already opened the box and see all the parts organized in boxes and bundles.  For 

the moment, keep them that way.  There are important things to do before you open your glue bottle.

Measure and identify the parts

:  

The kit is 

packed in groupings that protect the parts, and that 
is how the Parts List is organized.  As you measure 
and identify the parts, label them with sticky notes 
using the names from the parts list, and check 
them off the parts list so you know you have ev-
erything.  

Taking the time now to identify and 

organize the parts also makes them familiar 
so you will understand what the instructions 
intend
 

as you read ahead.

• Plan ahead so you know where you are going
• Read ahead so you know how to get there
• Paint ahead so the parts will be ready when 
you need them

www.realgoodtoys.help

Real Good Toys 

 122 Gallison Hill Rd 

Montpelier VT 05602 

 802 262-6018 

 www.realgoodtoys.com

Summary of Contents for #SE-JM907























Reviews: