X-Cell Furion 450 Assembly Manual
Page 80 of 89
Copyright Miniature Aircraft USA
Created: 8/27/2008
This document may not be distributed without permission of Miniature Aircraft USA
B.2
Setting Blade Limits
B.2.1 Install Flybar Lock/Blade Gauge
You will need to maintain the flybar at a level position in order to accurately set the blade pitch. The following shows
how to install the optional flybar lock.
Flybar Lock
Installs Over Top of Head
Lock Both Ends Under Flybar Install Pitch Gauge
B.2.2 Pitch Curve Setup
Now center the collective stick once again. If all links have been built per assembly manual’s instructions, a check of
the main rotor blade pitch should find it close to zero degrees pitch. Adjust either the double link from the flybar
cross tube to the bell mixer, or the long linkage from the swash plate to the bell mixer to get the blade angle zero
degrees.
Pitch Curve – Zero Degree
Blade Pitch - Zero
Level
Level
Level
