X-Cell Furion 450 Assembly Manual
Page 66 of 89
Copyright Miniature Aircraft USA
Created: 8/27/2008
This document may not be distributed without permission of Miniature Aircraft USA
5A.5.e 5A.5.f 5A.5.g 5A.5.h
Building Notes:
Snap the two flybar control links
onto the balls on the ends of the
mixer arms as shown.
Now you should align the flybar
paddles with each other and with
the centerline of the flybar
control arms. Do this visually or
acquire alignment tools such as
these.
5A.5.i 5A.5.j 5A.5.k 5A.5.l
Building Notes:
Install alignment gauges on the
paddles as shown and sight
down the length of the flybar to
align them with each other and
with the flybar control arms.
5A.5.m 5A.5.n 5A.5.o
Building Notes:
When installed and properly
aligned, the paddles will look like
this against the head at zero
degrees collective.
Adjust the paddles as necessary
until they align as shown with
the swashplate, flybar control
arm, washout arms, and blade
axle center line.
#130-040
Align a paddle with flybar
control arm end bolts
Align both paddles
with each other
