X-Cell Furion 450 Assembly Manual
Created: 8/27/2008
Copyright Miniature Aircraft USA
Page 23 of 89
This document may not be distributed without permission of Miniature Aircraft USA
1C.1.i
1C.1.j 1C.1.k 1C.1.l
Building Notes:
The landing gear installs onto
the bottom of the frame lower
plate as shown. The bolts
thread into the PEM nuts on
the bottom of the plate
The angled ends of the landing
gear face forward
1D.1 – Install Pitch/Aileron Servos
1D.1.a 1D.1.b 1D.1.c 1D.1.d
Building Notes:
The servo that will become the
“pitch” channel goes on the left
side of the model and the servo
that will be come the “aileron”
channel goes on the right side of
the model
Building Notes:
The servo mounts are adjustable
to work with many types of
servos.
The lower mount can be
adjusted up and down by
moving it by holding the anti-
rotation guide.
1D.1.e 1D.1.f 1D.1.g 1D.1.h
1D.1.i 1D.1.j 1D.1.k
Building Notes:
Once the servos are installed
you can tighten the 4 bolts that
hold the anti-rotation
guide/lower servo mount into
place. Use thread lock as shown
The servo horns will be installed
in a later step.
#130-037
Pitch Servo
Use anti-rotation guide to
adjust lower servo mount
up or down until upper
servo hole aligns
#130-037
Aileron
Servo
#130-037
Tighten
Both
Now
Tighten
Both
Now
#130-237
#130-037
