X-Cell Furion 450 Assembly Manual
Page 76 of 89
Copyright Miniature Aircraft USA
Created: 8/27/2008
This document may not be distributed without permission of Miniature Aircraft USA
If the movements are not correct, first make sure that the servos are connected to the correct channel on the
receiver.
If the servos do not move in unison, they can be adjusted by either:
•
changing the servo reverse settings for one or more of the cyclic channels
•
changing the “sign” of individual cyclic channels on the Swashplate mix menu (Swash AFR on Futaba radios).
For example if it is a +50% for a channel, make it a -50% to make it correct. You may have to change this for
one channel or all channels.
Servo Reversing
Swash AFR
For Futaba radios, the following settings are correct:
Channel
Servo Reversing
Swash AFR
Aileron
Normal
+50%
Elevator Normal
+50%
Pitch
Reverse +50%
