X-Cell Furion 450 Assembly Manual
Page 50 of 89
Copyright Miniature Aircraft USA
Created: 8/27/2008
This document may not be distributed without permission of Miniature Aircraft USA
4A.3 Install Servo Arms
Parts Relationship
4A.3.a 4A.3.b 4A.3.c 4A.3.d
Building Notes:
Shape the proper length control
arms as shown, then assemble
each as shown.
Install in their respective
positions and don’t forget the
servo arm retainer screws
4A.3.e 4A.3.f 4A.3.g 4A.3.h
Building Notes:
Revisit the servo previously
installed for the tail rotor.
Make sure it is properly centered
via the radio and that the servo
arm and t/r bell crank are at
right angles to the tail boom.
If necessary move the servo
arm ball installed earlier to a
new hole and apply thread lock
Building Notes:
Snap the ball links over the ball
on the t/r servo and on the t/r
bell crank
If the servo arm and the bell
crank are not at right angles to
the tail boom, adjust the ball
links as necessary until they are.
Make sure you have installed a
servo arm retainer screw.
#130-076
#130-010
#130-038
#130-038
#130-041
#130-070
#130-070
#130-010
#130-010
Pitch Servo Arm
Aileron Servo Arm
Elevator Servo Arm
Pitch Servo
Aileron Servo
Elevator Servo
Rudder Servo
Rudder Servo Wheel
Prints Actual Size
Bolt May
Protrude
Less on
Some
Servo
Arms
