X-Cell Furion 450 Assembly Manual
Created: 8/27/2008
Copyright Miniature Aircraft USA
Page 43 of 89
This document may not be distributed without permission of Miniature Aircraft USA
3B.2 Assemble T/R Pushrod
Parts Relationship
3B.2.a 3B.2.b 3B.2.c 3B.2.d
Building Notes:
Lightly sand the ends of the t/r
pushrod to help the adhesive
grip.
Test fit the pushrod ends to
make sure they slide fully over
the end. Sand as necessary
Attach the two ends as shown
using adhesive
3B.2.e 3B.2.f 3B.2.g
Building Notes:
Repeat the process for the other
end of the t/r pushrod. Align the
two links so they are at right
angles to each other
The overall length will be
approximately 312mm
measured from end to end
SET THIS ASIDE FOR NOW, IT
WILL BE INSTALLED IN A LATER
STEP.
#130-072
#130-038
#130-090
#130-080
#130-265
#130-260
#130-265
#130-080
#130-090
#130-265
#130-080
Thread in until it stops
#130-260
#130-265
Thread on ends as shown
PRINTS ACTUAL SIZE
Horizontal
Vertical
2 mm
