X-Cell Furion 450 Assembly Manual
Page 68 of 89
Copyright Miniature Aircraft USA
Created: 8/27/2008
This document may not be distributed without permission of Miniature Aircraft USA
Assembly Step #6 – Complete Model Assembly
6A) Canopy Components - Bag #9A, #9 Hardware
These Bags Should Contain:
6A.1 Assemble/Install Canopy
6A.1.a 6A.1.b 6A.6.c 6A.1.d
Building Notes:
Use a #9 (.196”) drill to open
the two mount holes on the side
canopy. Be careful to center the
drill in the relief hole. Using
scissors and/or a razor knife
trim the flashing from the
canopy edges and then open up
the top of the canopy following
the molded in outline.
#130-249
4” Plastic
Zip Ties
4 each
#130-248
Adhesive Back
Velcro 100mm
2 each
#130-247
Back to Back
Velcro 880mm
1 each
#130-250
Rubber
Canopy
Grommets
2 each
#130-024
M2 x 3
Phillips
Self
Tapping
Screw
6 each
#130-251
Drill #9
