MIMAKI CG-100SRIII, Operation Manual

Page: 11 / 172

Safety Precautions
x
1
2
3
4
5
6
Safety Labels
A safety label is stuck on the machine. The label informs the user of possible risks associated with the
machine.
Be sure to understand the correct meaning of the safety label to avoid danger.
If the safety label is illegible due to stains or has come off, purchase a new one from your local distributor or our
office. (Reorder: No.M904451, Safety label)
Depending on the manufacturing time, the label differs. When reordering the label, please ask for
M904451 as a order number.
CAUTION
Be careful with the movable parts Caution with cutters
• Do not touch the rolling grit roller; otherwise, you
may hurt your fingers or tear off your finger
nails.
• Do not touch the cutter blade, which is very
sharp.
• Do not shake or swing the cutter holder;
otherwise, the blade may come off.
• Keep your head and hands away from any
moving parts during cutting (plotting) operation;
otherwise, you may get your hair caught in the
machine or get injuries.
Connection of power supply cable
• Be sure to connect the ground wire. Using
without the ground wire causes the damage of
this device and electric shock that may be very
dangerous.
• Regarding the use of two polar plug outlet, you
must connect the auxiliary ground adapter to the
plug of power cable.
Earth the green wire (ground wire) of the ground
adapter. If you cannot, consult with an
electrician.
• Wear proper clothes. (Do not wear loose-fit
clothes or accessories). Bind a long hair.
Sheets
• Straighten the sheet of media, if significantly
curled, before using it for printing. Heavily curled
sheet affects the cutting (plotting) result.