MIMAKI CG-100SRIII, Operation Manual

Page: 17 / 172

Configuration and function
1-5
1
Be
fore Use
3
4
5
6
Operation Panel
Jog keys
The arrow keys are used as described in the table below.
In this manual, the sheets of media other than roll sheets are referred to as leaf sheets or cut sheets.
Before detection
of a sheet
After detection
of a sheet
When selecting a
function
When selecting a
setting value
Detects the width and the
front edge of the sheet. Shifts the carriage to
the left.
- -
Detects the width and
length of the sheet. Shifts the carriage to
the right.
- -
Detects the width and the
rear edge of the sheet. Move the sheet toward
the rear of the plotter. Restores the previous
function. Selects the previous
value.
Detects the width and
length of the sheet. Move the sheet toward
the front of the plotter. Selects the next
function.
Selects the next value.
key
Press this key to execute sheet
feeding.(
P.3-47)
FEED
key
This key switches the operation mode
between REMOTE mode and LOCAL
mode.
If this key is pressed when the plotter
is in operation, the plotter will come to
a halt. Press the key again to restart
the plotter,(
P.1-11)
REMOTE
key
Use this key to select a tool and establish tool
conditions. (
P.2-10)
TOOL
key
Use this key for detection of the sheet
or clearing of the detection
result.(
P.2-16)
SHEET SET
key
Use this key for detection of the sheet
or clearing of the detection
result.(
P.2-16)
SHEET SET
key
This key registers the operation or the
settings.
Use the key to correct the drifting of the sheet
during cutting (plotting) operation. (
P.3-
48)
ENTER/HOLD
Display panel
The display panel indicates tool conditions such as speed,
pressure and offset, tool coordinates, functions and error
messages.
POWER lamp
This lamp lights up when the power to
the plotter is turned on.
key
Use this key to enter function
setting mode.
The functions of FUNC1 to FUNC3
are displayed at the bottom of the
display panel.
FUNCTION
key
This key cancels the last input value
or returns the setting menu to the
immediate higher level in the
hierarchy.
Use the key to detect only the sheet
width.
END
Press the keys with the
fingers.
Pressing with a sharp
blade or a pointed thing
may break the key.
JOG Key
Each of these arrow keys shifts the carriage or
sheet in the direction of the arrow or changes
settings.(
P.1-5)