MIMAKI CG-100SRIII, Operation Manual

Page: 10 / 172

ix
WARNING
Do not disassemble or remodel the plotter. Handling of the power cable
• Never disassemble or remodel the plotter.
Disassembly or remodeling can result in an
electric shock or breakdown of the machine.
• Use the supplied power cable. Take care not to
damage, break or work upon the power cable. If
a heavy material is placed on the power cable,
or if it is heated or pulled, the power cable can
break, thus resulting in fire or electric shocks.
Avoid locating the plotter in a damp environment. In case abnormal event occurs.
• Do not use the plotter in a damp place. Do not
splash water onto the machine. Use in such an
environment can give rise to fire, electric shocks
or breakdown of the plotter.
• Use of the plotter under an abnormal condition
where the device produces smoke or strange
smell can result in fire or electric shocks. If such
an abnormality is found, be sure to turn off the
power switch immediately and unplug the cable
from the wall outlet. Check first that the plotter
no longer produces smoke, and contact your
distributor for repair.
• Never repair your plotter by yourself since it is
very dangerous for you to do so.
CAUTION
A place exposed to direct sunlight On an inclined surface
A place where temperature or
humidity varies significantly
• Use the plotter under the
following environmental
conditions:
• Operating environment:
5 to 35°C
35 to 75% (Rh)
A place that vibrates
A place exposed to direct air
flow from an air conditioner or
the like.
Around a place where fire is used