MIMAKI CG-100SRIII, Operation Manual

Page: 129 / 172

3-79
1
1
3
Useful Function
5
6
Miscellaneous Settings
Function
name
Outline Setting values
Up Hight
Set the height when lifting the tool
5 0 % ,
7 5 % ,
100%
Specify the height from the down position to the
lifted position, with the approximate percentage
of the stroke.
The smaller the amount of the lifting, the faster
the plotter cuts the media. For thick media or
when the cutter scratches the media because the
sheet is not flat, set the amount of lifting bigger.
NET-
WORK
( P.3-
61 )
Set the network.
IP Address The IP address currently used by this machine is displayed.
MAC Address
The IP address currently used by this machine is displayed.
DHCP
ON
When it is ON, the IP address given by the DHCP server is used.
OFF
AutoIP
ON
When it is ON, the IP address is determined by the AutoIP protocol.
However, DHCP is ON, DHCP has priority.
OFF
IP Address
*1
Set the IP address used by this machine.
Def.Gateway
*1
Set the default gateway used by this machine.
DNS Address
*1
Set the DNS server address used by this machine.
SubNet Mask
*1
Set the digit number of the subnet mask used by this machine.
EVENT
MAIL
(
P.3-
63
)
Delivery
Set the event mail
function.
ON
When the set event occurs, the function to
send the e-mail becomes ON.
OFF
When the set event occurs, the function to
send the e-mail becomes OFF.
Event
PlotStart Event
ON
Set whether you send/ do not send the e-
mail at the start of plotting.
OFF
Plot End Event
ON
Set whether you send/ do not send the e-
mail at the end of plotting.
OFF
Error Event
ON
Set whether you send/ do not send the e-
mail when an error occurs.
OFF
Warning Event
ON
Set whether you send/ do not send the e-
mail when a warning occurs.
OFF
Address
Set the e-mail address to
which you send the event mail. Alphanumeric characters and symbols (within 96
characters)
Subject
Set the characters to write in
the subject of the event mail. Alphanumeric characters and symbols (within 8
characters)
SERVER
SMTP Address
Set the SMTP server.
SMTP PORT No.
Set the SMTP port number.
Sender Mail Adr.
Set the e-mail address to be used as the sender mail
address.
Auth.
POP before
SMTP
Set the SMTP server authentication method
.
SMTP Auth
OFF
USER NAME
*2
Set the user name used for the authentication.
PASS WORD
*2
Set the password used for the authentication.
POP3 ADDRESS
*3
Set the POP server.
APOP
*3
Set ON/ OFF of APOP.
Test
Send the test e-mail.
*1. Settable when both of DHCP and AutoIP are [OFF]
*2. Settable only when Auth. is not OFF
*3. Settable only when Auth. is POP before SMTP