Microscan MS-810, User Manual

Page: 75 / 144

Code Type Commands
MS-810 Industrial Scanner User’s Manual
3-13
3–Ser
ial
Conf
ig.
Code Type Commands
Code 39
Format: < Kp status,check digit status,check digit output status,large intercharacter
gap,fixed code length status,code length>
Example: To set Fixed Code Length to 30, send <K,,,,1,30> or <Kp1,0,0,0,1,30> .
Codabar
Format: < Kq status,start & stop match status,start & stop output status,large
intercharacter gap,fixed code length status,code length,check digit type,check digit
output>
Example: To set Fixed Code Length to 9, send <Kq1,,,,1,9> or <Kq1,1,1,0,1,9> .
I 2 of 5
Format: < Kr status,check digit status,check digit output status,code length #1,code
status:
0 = Disabled
1 = Enabled
check digit status:
0 = Disabled
1 = Enabled
check digit output status:
0 = Disabled
1 = Enabled
large inter-character gap:
0 = Disabled
1 = Enabled
fixed code length
status:
0 = Disabled
1 = Enabled
code length:
Default is 10 .
Any number from 1 to
64.
status:
0 = Disabled
1 = Enabled
start & stop match status:
0 = Disabled
1 = Enabled
start & stop output status:
0 = Disabled
1 = Enabled
l arge inter-character gap:
0 = Disabled
1 = Enabled
fixed code length status:
0 = Disabled
1 = Enabled
code length:
Default is 10
Any number from 1 to 64.
check digit type:
0 = Disabled
1 = Mod 16
2 = NW7
3 = Both
check digit output:
0 = Disabled
1 = Enabled