Microscan MS-810, User Manual

Page: 119 / 144

Special 5 VDC MS-810
MS-810 Industrial Scanner User’s Manual
A-21
Appe
ndices
Appendix H — Special 5 VDC MS-810
A 5 Volt version of the MS-810 is available for special applications which requires the
scanner to have 5 volts input or connections congruent with the IB-105 adaptor box.
Figure A-8 shows a 5V system with an IB-105 and an auxiliary monitor (via aux port).
(See also Appendix I — “Using the IB-105.” )
Power Supply Requirements: Input +5 VDC, ±4% regulated @ 480 mA with 200 mV
p-p max. ripple.
Table A-5 15-pin High-density D-subminiature Connector for 5 V Special Only
Pin # Function Pin # Function
1 +5 VDC (in) 9 Trigger (in) from 3V to 24V
2 Transmit data (RS-232) (out) 10 CTS
3 Receive data (RS-232) (in) 11 NC
4 Signal ground (RS-232) 12 New master
5 NC 13 Chassis ground
6 RTS 14
Relay-2 Driver (out). Can sink 10 mA
and source 2 mA.
7
Relay-1 Driver (out). Can sink 10 mA
and source 2 mA.
a
a. Relay-1 output also causes closure of a relay in the IB-105 box, accessible through pin 15 of the
IB-105 host connector (see Table A-9, “IB-105 D-sub Host Connector” ).
15 NC
8 Default configuration (in)
Bar-coded
item flow
IB-105
To power supply
External Object
Detector
MS-810
Scanner
Host
Auxilliary
Monitor
2 outputs from
internal relays
Figure A-8 5 Volt Setup with Auxiliary Monitor
5
10
15
11
1
6
Figure A-8 15-pin Connector