Microscan MS-810, User Manual

Page: 38 / 144

Chapter 2
2-16
MS-810 Industrial Scanner User’s Manual
2–Menu Conf
ig
.
Operation Menu
Figure 2-4 Operation Menu Structure
Default
Clicking the DEFAULT button will reset all parameters on the current menu to
defaults. This does not take effect until it is saved to the scanner with the SEND/NO
SAVE or SEND/SAVE buttons.
Triggering Mode
Default: Continuous Read
Options: Continuous Read, Continuous Read 1 Output, External Level, External Edge,
Serial Data, Serial Data & External Edge
Allows you to establish the type of trigger event that will initiate or end the read cycle.
(See
“End of Read Cycle” on page 2-18 .)
Continuous Read
Note: If both Continuous Read and Match Code are enabled the scanner defaults to
Continuous Read 1 Output mode.
Trigger input options are disabled and the scanner is always in the read cycle. Bar
code data is decoded, and label information is transmitted repeatedly, as long as the