Microscan MS-810, User Manual

Page: 16 / 144

Chapter 1
1-6
MS-810 Industrial Scanner User’s Manual
1–Qui
ck St
art
Step 5 Mount Scanner
The MS-810 scanner can be top or bottom mounted depending on your model type.
Use the measurements provided in figure 1-6 to locate centers of mounting holes
and drill as specified:
Top mount – drill two 0.16 inch (4.06 mm) diameter holes.
Bottom mount – drill two 0.203 inch (5.16 mm) diameter holes.
Caution : Maximum penetration depth of screws is 0.29 inch (7.37 mm) for top mount or
0.15 inch (3.81 mm) for bottom mount.
Caution : To prevent twisting or distortion of the scanner housing, ensure that the mount-
ing surface or bracket is flat.
Figure 1-6 MS-810 Mounting Dimensions