Microscan MS-810, User Manual

Page: 121 / 144

Using the IB-105
MS-810 Industrial Scanner User’s Manual
A-23
Appe
ndices
Table A-6 IB-105 Trigger Connector
Table A-7 IB-105 Scanner Connector
Table A-8 IB-105 Power Connector
Table A-9 IB-105 D-sub Host Connector
Pin Function
1 Trigger in to pin 9 of scanner connector
2 Relay contact normally open (up to 1watt)
3 VCC (+5V)
4
VBB (+12V, if using Microscan’s stan-
dard object detector
a
)
a. P/N 99-440001-03
5 Ground
6 Relay common
Pin Function
1 +5 VDC (in)
2 Transmit data (RS-232) (out)
3 Receive data (RS-232) (in)
4 Signal ground (RS-232)
5 NC
6 RTS (5V only)
7
Relay-1 Driver (out). Can sink 10 mA
and source 2 mA.
a
a. Relay-1 output also causes closure of an iso-
lated relay between pin 15 and pin 17 of
the IB-105 host connector.
8 Default configuration (in)
9 Trigger (in) from 3V to 24V
10 CTS (5V only)
11 NC
12 New master (in)
13 Chassis ground
14
Relay-2 Driver (out). Can sink 10 mA
and source 2 mA
15 NC
Pin Function
1 Signal ground
2 Chassis ground
3 +5 VDC
4 NC
5 NC
Pin Function
1 Chassis ground
2 Host RS-232 TXD (RS-232)
3 Host RS-232 RXD (RS-232)
4
Host RS-232 RTS or under software
control aux RS-232 TXD, or RS-485
transmitter enable (out)
5
Host RS-232 CTS or under software
control aux RS-232 RXD (in)
6
Relay-2 output from pin 14 of scanner
connector.
7 Signal ground
8
Relay-1 output from pin 7 of scanner
connector.
9 VCC (+5V)
10
Trigger input; same as pin 1 of trigger
connector
11
Default configuration pin goes to pin 8 of
the scanner connector and the default
switch
12 NC
13 Host RS-422/RS-485 (+in)
14 Host RS-422/RS-485 (–out)
15
Relay contact normally open (up to
1watt)
(common with pin 17)
16 Host RS-422/RS-485 (–in)
17
Relay contact normally open (up to
1watt)
(common with pin 15)
18 NC
19 Host RS-422/RS-485 (+out)
20 NC
21 NC
22 Ground
23 NC
24 NC
25
New master input to pin 12 of the scan-
ner connector and new master button