Microscan MS-810, User Manual

Page: 49 / 144

Code Type Menu
MS-810 Industrial Scanner User’s Manual
2-27
2–Menu C
o
n
fig
.
Start & Stop Output
Default: Enabled
Options: Enabled, Disabled
Allows the start and stop characters to be transmitted with bar code data.
Large Intercharacter Gap
Default: Disabled
Options: Disabled, Enabled
Allows the scanner to read labels with gaps between bar code characters exceeding
three times the narrow element width.
Fixed Code Length
Default: Disabled
Options: Disabled, Enabled
Used to increase data integrity by ensuring that only label length will be accepted.
Code Length
Default: 10
Options: 1 to 64
Note : Fixed Code Length must be enabled for Code Length to take effect.
Allows you to specify the exact number of characters that the scanner will recognize.
The scanner will ignore any code not having the specified length.
Note: Setting Code Length to any number less than 4 will produce undetermined
results.
Check Digit
Default: Disabled
Options: Disabled, Modulus 16, NW 7, Both
Allows you to select the type of checksum system Codabar will use.
Check Digit Output
Default: Disabled
Options: Disabled, Enabled
When enabled, the check digit character is sent along with the label data. When dis-
abled, label data is sent without the check digit.