Microscan MS-810, User Manual

Page: 55 / 144

Output Menu
MS-810 Industrial Scanner User’s Manual
2-33
2–Menu C
o
n
fig
.
Output Menu
Figure 2-9 Scanner Output Menu Structure
Default
Clicking the DEFAULT button will reset all parameters on the current menu to
defaults. This does not take effect until it is saved to the scanner with the SEND/NO
SAVE or SEND/SAVE buttons.
Note : Bar code output data and noread messages are transmitted on pin 2 under
conditions set principally in Bar Code Output.
Relay-1 and Relay-2
Relay pulses are transmitted via pins 7 and 14 (Relay-1 and Relay-2, respectively)
and individually configured under conditions set in Relay-1 and Relay-2.
Note: Relay-1 output also causes closure of a relay in the IB-105 box, accessible
through pin 15 of the IB-105 host connector only in the 5 V version (see table A-9
on page A-23 ).
Relay-1 and relay-2 can allow simultaneous output under individually programmed
conditions.