Chapter 2
2-24
MS-810 Industrial Scanner User’s Manual
2–Menu Conf
ig
.
Match Length
Default:
1
Options: 1
to
31
Defines the length of the character string that will be compared with that of the mas-
ter label when Match Code Type is set to Enabled or Sequential and Match Start posi-
tion is set to 1 or greater. For example, If Match Length is set to 6 in a 10 character
label, and Match Start Position is set for 2, only the 2nd through 7th characters (from
left to right) will be compared.
Wild Card Character
Default:
*
(asterisk)
Options:
Any ASCII character
Allows you to define the wild card character that can be used when defining a master
label.
Master Label Entry
With Match Code Type set to Enabled, Sequential, or Wild Card, a mas-
ter label can be entered in four ways:
1. By typing in master label data in the Utilities menu.
2. With New Master Pin enabled (see
), toggling scanner pin 12
to ground (or by momentarily pressing the New Master button on the
IB-105) will save the next label read as the master label.
3. Sending serial command <G> allows the next label read to be the
master label.
4. Sending a serial command in the format <)XXXX)> downloads data
as the master label.
Summary of Contents for MS-810
