GFC-2x00 Mounting Instructions
to 2KN Scanners produced before August 2009
When mounting GFC-2x00 to a 2KN family
scanner produced
before August 2009
(see
product label), only the following items are
used for mounting:
Deflection Mirror bag 1
Fixing Screws in bag 1
For this mounting procedure the parts in
bag 2 (90°/105° scanning window and
fixing screws) are not used
1)
Remove the 2KN 0° scanning window
from the scanner by unscrewing the two
cover screws.
CAUTION
Avoid any contact with the
deflection mirror, mirrored rotor,
the lenses or other optical
components; otherwise the
performance of the reader will
be reduced.
2)
Fix the mirror (from bag 1) to the device
by means of the two fixing screws
(from
bag 1)
.
3)
Clean the mirror surface and reading
window with a clean soft cloth and
alcohol before closing the scanner.
4)
Remount the 0° scanning window
so
that the opening face is now at 90° with
respect to the scanner body. Tighten the
two cover screws.
Cover Screws
2KN Scanner Without Deflection Mirror
Fixing Screws
Deflection Mirror
Mounting Deflection Mirror
2KN Scanner With Deflection Mirror
The reading position with respect to the
scanner is shown for each mirror.
Laser Beam
GFC-2000
105° ± 2°
90° ± 2°
GFC-2100
Laser Beam Output Position
821001610
GFC-2x00 Mounting Instructions
to 2KN Scanners produced before August 2009
When mounting GFC-2x00 to a 2KN family
scanner produced
before August 2009
(see
product label), only the following items are
used for mounting:
Deflection Mirror bag 1
Fixing Screws in bag 1
For this mounting procedure the parts in
bag 2 (90°/105° scanning window and
fixing screws) are not used
1)
Remove the 2KN 0° scanning window
from the scanner by unscrewing the two
cover screws.
CAUTION
Avoid any contact with the
deflection mirror, mirrored rotor,
the lenses or other optical
components; otherwise the
performance of the reader will
be reduced.
2)
Fix the mirror (from bag 1) to the device
by means of the two fixing screws
(from
bag 1)
.
3)
Clean the mirror surface and reading
window with a clean soft cloth and
alcohol before closing the scanner.
4)
Remount the 0° scanning window
so
that the opening face is now at 90° with
respect to the scanner body. Tighten the
two cover screws.
Cover Screws
2KN Scanner Without Deflection Mirror
Fixing Screws
Deflection Mirror
Mounting Deflection Mirror
2KN Scanner With Deflection Mirror
The reading position with respect to the
scanner is shown for each mirror.
Laser Beam
GFC-2000
105° ± 2°
90° ± 2°
GFC-2100
Laser Beam Output Position
821001610
