Microplex M204, Installation And Configuration Manual

Page: 77 / 204

CONFIGURING THE M204 FOR WINDOWS: TCP/IP Setup 69
4 A dialogue box will appear showing your current network settings. Under
Installed Network Software, check to see if MS TCP/IP Printing shows. If it
doesn’t, you’ll need to perform the following steps.
5 Select Add New Software.
6 Select TCP/IP Protocol and Components.
7 Click on Continue.
8 Select TCP/IP Printing Support from the TCP/IP components list that displays.
You may also want to select Connectivity Utilities.
9 Click on Continue.
Windows NT NetBIOS Network Software Installation
1 Go to the Main program group.
2 Double click on Control Panel.
3 Double click on Network.
4 A dialogue box will appear showing your current network setting. Under
Installed Network Software, check to see if NetBIOS TCPIP->Streams Envi-
ronment appears. If not, you’ll need to add this new software by clicking on the
Add New Software Button.
Windows For Workgroups NetBIOS Network Software Installation
1 Make sure that you have the Microsoft TCP/IP-32 group in your Program Man-
ager. If you do not have the file, wfwt32.exe, you can download it from:
• Compuserve in “MS Software Library”
• Microsoft’s FTP site, ftp.microsoft.com, under “Softlib/MSLFILES”
• Microplex’s FTP site, ftp.microplex.com, under “support/misc”
2 Once this is placed in a directory on you WfW station, you will need to double
click on the Network Setup icon in the Network Group.
3 Click on Drivers.
4 Since the TCP/IP services will not yet be listed here, click on Add Protocols.
5 Select Unlisted.
6 Specify the directory where the file exists. A new TCP/IP-32 program group will