Microplex M204, Installation And Configuration Manual

Page: 119 / 204

USING THE M204’S COMMAND SET: npsh Command Set 111
store tcpip route add [host|net] targetipaddress[/target-
netmask] [routeripaddress] [ifnum|com1|com2] [metric]
Add a specific route to the Print Server’s routing table.
store tcpip route add 192.75.30.11 192.75.30.3 1
stores a host with IP address 192.75.30.11 into the unit’s routing table for the
first NIT module. The router’s IP address is 192.75.30.3.
store tcpip route add|del default routeripaddress ifnum
Add or delete a default router entry in the M204’s routing table.
store tcpip route del [host|net] targetipaddress ifnum
Delete a specific route from the routing table of the NIT module specified by
ifnum.
store tcpip tcp access [root] add|del ipaddress [/net-
mask]
Add or delete a host or network in the TCP connection access list. An empty
list allows any host to have TCP sessions with the M204.
store tcpip tcp access add root 192.75.30.11
Provides the host with IP address 192.75.30.11 root access to the Print Server.
store tcpip tcp opts [-]keepalive
Enable or disable the keepalive packet usage in the TCP stack.
store tcpip tcp rxwin
packetsize
Modify the receive window size property for TCP connections. packetsize is
the number of full size packets and must be in the range 1 to 8. The higher the
number, the less simultaneous TCP connections.
See also: list tcpip on page 88.
Example
Example