Microplex M204, Installation And Configuration Manual

Page: 132 / 204

124 USING THE M204’S ADDITIONAL OPTIONS: TCP/IP Options
Novell and TCP/IP are the only protocols that offer this configuration. The M204 pro-
vides simultaneous support of multiple Novell frame types. Please see store pserver
on page 107 and store tcpip on page 110 to find out which frame types are offered in
each environment.
TCP/IP Options
Restoring To Factory Defaults
Once and a while, it is necessary to set the M204’s network parameters back to factory
defaults whether it is because you are moving the Print Server, you are changing your
addressing schemes, or you just want to start from scratch. These network parameters
include: IP address, netmask, and routing table entries.
Two methods are available for doing this:
1 physically moving jumpers inside the Print Server,
2 issuing a command on the M204 and rebooting.
Either way will produce an M204 that has all of the network settings it came with
originally. Each method is described next.
Through Jumpers
For normal operation, the unit has its S3 strap on pins 1 and 2 for EEPROM Enable.
Moving the strap from this position to pins 3 and 4, or DEFAULT IP, will override
your network settings and put the unit to factory defaults. Please see M204 Jumper
Settings on page 125 for the jumper locations.
Caution
The inside of the M204 is sensitive to static electricity so be sure to ground yourself to
the chassis before touching any internal components.
To manually set the unit to defaults:
1 Open the cover.
2 Move the jumper strap from pins 1 and 2 to 3 and 4.